Neue Funktionen bei WP-D Schweißpositionierern

We have completed the production of the WP-D 3000 welding positioner, designed for positioning workpieces of various shapes during the welding process. The rotation and tilting of the base plate are motorized. The additional hydraulic axis allows for further lift.

Schweißpositionierern. WP-D Welding Positioner with motorized rotation and tilting, featuring a hydraulic lifting axis, designed for handling large loads up to 50 tonnes.
WP-D Welding Positioner (Schweißpositionierern)

New Features of the Welding Positioner (Schweißpositionierern)

A remote control with a touch screen and a standard quick connector. It is now possible to completely disconnect the controller. The advantage is that foot switches and other devices can connect to the same connector. In the event of damage or failure of the optional device, it can be easily disconnected via the connector and sent to us for repair.

Touch remote control pendant for speed and position control on the welding positioner
Touch remote control pendant

Another new feature is the foot switch used to control the rotation speed. The speed changes depending on the pressure applied to the switch. This type of switch has been integrated several times before, but this is the first time it is used on the WP-D table.

With the remote control, the positioner can be operated from all sides, up to a distance of ten meters (or more upon request). The operation of the control buttons is simple and practical. The remote control is housed in a robust steel casing designed for industrial use. The switches are protected against drops with a steel guard, and the cable is shielded with a steel braid, resistant to stretching and compression.

Both speeds, tilt, and rotation are adjustable. On the rear side, there is a connector (PAT) for the welding machine’s ground cable. The rotary table for welding is connected with a standard plug to a 230V power supply.

Produktpalette